8721g-g Mega Gloss 1 Part Marine Topside Polyurethane Enamel
The key benefits of 8721g G Mega Gloss 1 Part Marine Topside Polyurethane cannot be overstated. It’s more than just a cosmetic enhancement; it’s a powerful tool for maintaining the integrity and longevity of your marine vehicles.
- Protected against harsh elements:
Boats are constantly exposed to the punishing forces of sun, wind, and water. This product provides a robust barrier. Shielded from the degrading effects of harmful elements, it ensures your boat remains in prime condition.
- Unsurpassed gloss retention and UV resistance:
Withstanding the intense sun rays, our marine polyurethane retains its high gloss, warding off any dullness that’s typically associated with regular exposure. Its superior UV resistance assures you that your boat’s shine isn’t short-lived.
- Resistance against chipping, peeling, and fading:
Constant exposure to wind and water can severely damage a boat’s surface. Peeling and chipping are common. But this is a worry of the past with our Mega Gloss marine polyurethane. It provides a resistant seal that defends the surface from any potential damage. The chances of fading colors over time is also significantly reduced.
- Unmatched durability and longevity:
Along with its protective properties, 8721g G Mega Gloss Marine Polyurethane boasts impressive durability. Boats treated with it demonstrate unrivaled resilience, maintaining their aesthetic appeal and structural integrity for years.
More than a protective coating, it’s a long-term investment to keep your boat at its best for times to come. Be it a leisurely cruise or a fishing expedition; a ship in top condition only enriches the experience. The incredible attributes of our Marine Topside Polyurethane will ensure your boat stays looking its best for every voyage.
![](https://riproar.com/wp-content/uploads/2023/11/image1-66.jpg)
How to Apply 8721g G Mega Gloss 1 Part Marine Topside Polyurethane
In order to achieve the best results, you must carefully consider each part of the application process. Understanding these steps can help in maintaining your marine vehicles and expanding their lifespan.
Preparing the Surface
Preparation is key. It’s essential to make sure that the surface area is cleaned thoroughly to provide the polyurethane the best chance at adhesion. So, first, remove any dirt, flaking paint, and debris. We suggest using a sandpaper grit of 220 to 320 for sanding.
Make sure the surface is free from dust and oils. Use a damp cloth to wipe down the entire area and give it enough time to dry completely. It’s vital to have a clean, dry, and dull surface to work with as it’s easier for the 8721g G Mega Gloss 1 Part Marine Topside Polyurethane to adhere.
Mixing the 8721g G Mega Gloss 1 Part Marine Topside Polyurethane
Composite materials in the 8721g G Mega Gloss 1 Part Marine Topside Polyurethane can separate if they stay in storage for a long period. It’s why you have to mix the solution well before application.
The golden rule in mixing is to stir, not shake. Shaking will introduce more air into the container, which can result in a poor finish. The optimal method to ensure a smooth application is to stir thoroughly for a couple of minutes.
Applying the Polyurethane
After preparing the surface and mixing the solution, you’re now ready to apply the polyurethane.
Paint brushes, roller brushes, or a spray gun can do the application. However, a fine-bristled brush ensures smoother application and a better finish. Also, consider working on small square sections at a time to prevent the polyurethane from drying and forming clumps before you’re finished.
Apply in even strokes, similar to how you would paint any other surface, and try to avoid drips or puddles. If working in hot or windy conditions that may cause the polyurethane to dry too quickly, reduce the working section size and apply thinner.
By taking the time to properly prepare your boat, the 8721g G Mega Gloss 1 Part Marine Topside Polyurethane will act as a protective barrier for your marine vehicle. The end result will be well worth the investment in time and materials. Bear in mind that patience is essential for a good finish. Make sure to allow each coat to dry thoroughly before applying the next layer of gloss.